Monocure3D Resin | Yourtech Services https://www.yourtechservices.com.au/product-category/3d-printers/monocure3d-resin/ Wed, 09 Mar 2022 01:31:55 +0000 en-AU hourly 1 https://wordpress.org/?v=6.7.1 Monocure3D Resin White 1L https://www.yourtechservices.com.au/product/monocure3d-resin-white/ Wed, 09 Mar 2022 01:30:17 +0000 https://www.yourtechservices.com.au/?post_type=product&p=2728 RAPID Model Resin range is designed for all MSLA type 3D printers such as the Zortrax Inkspire, Anycubic, Phrozen, Elegoo, Prusa, etc. Where the LED power output is less than 100w.

The post Monocure3D Resin White 1L appeared first on Yourtech Services.

]]> Rapid Model Resin range was originally developed around MSLA printers that used lower powered LED arrays to cure the resin. The unique, epoxy-based system creates models that process a hard surface finish without the brittleness you would expect. This resin is easy to use; give the bottle a quick shake then, pour and print! The typical normal layer durations for a colour-based MSLA printer are 5-6 seconds per layer or 3 seconds in a printer with a monochrome LCD. Rapid Resin only requires a short post-curing required to remove tackiness after cleaning.

The post Monocure3D Resin White 1L appeared first on Yourtech Services.

]]> Monocure3D Resin Grey 1L https://www.yourtechservices.com.au/product/monocure3d-resin-grey/ Wed, 09 Mar 2022 01:27:17 +0000 https://www.yourtechservices.com.au/?post_type=product&p=2726 RAPID Model Resin range is designed for all MSLA type 3D printers such as the Zortrax Inkspire, Anycubic, Phrozen, Elegoo, Prusa, etc. Where the LED power output is less than 100w.

The post Monocure3D Resin Grey 1L appeared first on Yourtech Services.

]]> Rapid Model Resin range was originally developed around MSLA printers that used lower powered LED arrays to cure the resin. The unique, epoxy-based system creates models that process a hard surface finish without the brittleness you would expect. This resin is easy to use; give the bottle a quick shake then, pour and print! The typical normal layer durations for a colour-based MSLA printer are 5-6 seconds per layer or 3 seconds in a printer with a monochrome LCD. Rapid Resin only requires a short post-curing required to remove tackiness after cleaning.

The post Monocure3D Resin Grey 1L appeared first on Yourtech Services.

]]> Monocure3D Resin Gunmetal 1L https://www.yourtechservices.com.au/product/monocure3d-resin-gunmetal/ Wed, 09 Mar 2022 01:24:34 +0000 https://www.yourtechservices.com.au/?post_type=product&p=2724 RAPID Model Resin range is designed for all MSLA type 3D printers such as the Zortrax Inkspire, Anycubic, Phrozen, Elegoo, Prusa, etc. Where the LED power output is less than 100w.

The post Monocure3D Resin Gunmetal 1L appeared first on Yourtech Services.

]]> Rapid Model Resin range was originally developed around MSLA printers that used lower powered LED arrays to cure the resin. The unique, epoxy-based system creates models that process a hard surface finish without the brittleness you would expect. This resin is easy to use; give the bottle a quick shake then, pour and print! The typical normal layer durations for a colour-based MSLA printer are 5-6 seconds per layer or 3 seconds in a printer with a monochrome LCD. Rapid Resin only requires a short post-curing required to remove tackiness after cleaning.

The post Monocure3D Resin Gunmetal 1L appeared first on Yourtech Services.

]]> Monocure3D Resin Clear 1L https://www.yourtechservices.com.au/product/monocure3d-resin-clear-1l/ Wed, 09 Mar 2022 01:17:41 +0000 https://www.yourtechservices.com.au/?post_type=product&p=2722 RAPID Model Resin range is designed for all MSLA type 3D printers such as the Zortrax Inkspire, Anycubic, Phrozen, Elegoo, Prusa, etc. Where the LED power output is less than 100w.

The post Monocure3D Resin Clear 1L appeared first on Yourtech Services.

]]> Rapid Model Resin range was originally developed around MSLA printers that used lower powered LED arrays to cure the resin. The unique, epoxy-based system creates models that process a hard surface finish without the brittleness you would expect. This resin is easy to use; give the bottle a quick shake then, pour and print! The typical normal layer durations for a colour-based MSLA printer are 5-6 seconds per layer or 3 seconds in a printer with a monochrome LCD. Rapid Resin only requires a short post-curing required to remove tackiness after cleaning.

The post Monocure3D Resin Clear 1L appeared first on Yourtech Services.

]]> Monocure3D Resin Blue 1L https://www.yourtechservices.com.au/product/monocure-resin-blue-1l/ Wed, 09 Mar 2022 01:14:40 +0000 https://www.yourtechservices.com.au/?post_type=product&p=2720 RAPID Model Resin range is designed for all MSLA type 3D printers such as the Zortrax Inkspire, Anycubic, Phrozen, Elegoo, Prusa, etc. Where the LED power output is less than 100w.

The post Monocure3D Resin Blue 1L appeared first on Yourtech Services.

]]> Rapid Model Resin range was originally developed around MSLA printers that used lower powered LED arrays to cure the resin. The unique, epoxy-based system creates models that process a hard surface finish without the brittleness you would expect. This resin is easy to use; give the bottle a quick shake then, pour and print! The typical normal layer durations for a colour-based MSLA printer are 5-6 seconds per layer or 3 seconds in a printer with a monochrome LCD. Rapid Resin only requires a short post-curing required to remove tackiness after cleaning.

The post Monocure3D Resin Blue 1L appeared first on Yourtech Services.

]]> Monocure3D Resin Black 1L https://www.yourtechservices.com.au/product/monocure-resin-black-1l/ Wed, 09 Mar 2022 00:59:40 +0000 https://www.yourtechservices.com.au/?post_type=product&p=2718 RAPID Model Resin range is designed for all MSLA type 3D printers such as the Zortrax Inkspire, Anycubic, Phrozen, Elegoo, Prusa, etc. Where the LED power output is less than 100w.

The post Monocure3D Resin Black 1L appeared first on Yourtech Services.

]]> Rapid Model Resin range was originally developed around MSLA printers that used lower powered LED arrays to cure the resin. The unique, epoxy-based system creates models that process a hard surface finish without the brittleness you would expect. This resin is easy to use; give the bottle a quick shake then, pour and print! The typical normal layer durations for a colour-based MSLA printer are 5-6 seconds per layer or 3 seconds in a printer with a monochrome LCD. Rapid Resin only requires a short post-curing required to remove tackiness after cleaning.

The post Monocure3D Resin Black 1L appeared first on Yourtech Services.

]]>